| FEEDOUT TYPE: |
Via the fixed elevator that has an endless chain with 3” spikes that tear at the material, ensuring that a well aerated row is presented. Priority oil flow to the elevator motor ensures maximum torque, this can be set at the block - Options include - hydraulic tilting elevator - round bale shredder rota - electric over hydraulic controls |
| BALE TYPES: |
Will feed out all square bales and pit silage over the elevator and if round bales are present the optional shredder rota on nearside is recomended |
| CROP TYPES: |
Silage bales, hay & straw, all types of square bales and both grass and maize silage |
| BODY TYPE: |
Bath tub one piece monocoque body, with top RHS shock rails |
| ELEAVATOR ANGLE: |
Fixed angle as standard with optional tractor controlled elevator with either 60° or 90° angle options |
| 4’ ROUND BALES: |
6 up tp 6' diameter |
| 4’ x 3’ SQUARE BALES: |
6 at 7’ long (as a single layer |
| CUBIC CAPACITIES: |
11m³ level, 17m³ potential approx |
| KGS CAPACITY: |
7,200kgs |
| BODY LENGTH: |
8,800mm |
| OVERAL LENGTH: |
10,250mm |
| SIDE DEPTH: |
600mm |
| BODY WIDTH ID: |
2,100mm |
| OVERAL WIDTH: |
2,640 without shredder. 2940mm with shredder |
| AXLE SINGLE: |
n/a |
| SINGLE WHEELS: |
n/a |
| AXLE TANDEM: |
70mm / 6 stud brakeless |
| TANDEM WHEELS: |
400 / 60 x 15.5 |
| SUSPENSION: |
Tandem walking balance beam |
| LOADING HEIGHT: |
1,650mm approx (subject to wheels) |
| CHASSIS: |
200 x 100 x 6mm fully welded chassis |
| DRAW BAR LENGTH: |
1,450mm as standard with option for 1,750mm for wide track tractor or 2,050mm for tractors running dual wheels |
| FLOOR THICKNESS: |
3mm mild steel |
| TOW EYE: |
Fixed eye as standard or Optional swivel eye |
| HEADBOARD: |
Fixed headboard with 3mm agrimesh for maximum visibility |
| FINISH/COLOUR: |
Blasted, etch base zinc high build primer then dried. Followed by 2 x gloss coats of gloss paint Agmech Yellow. |
| OPTIONS: |
Dicuss your individual requirements with your dealer as a range of options are available. |
