| BODY TYPE: |
Steel flat floor Hinged removable sides and headboard |
| CAPACITY: |
8 tonnes by design |
| CAPACITIES: (Level Load) |
4.1m³ level loaded @ 2,000 kgs/m³ |
| BODY LENGTH: |
4,000mm |
| BODY WIDTH: |
2,340mm |
| BODY DEPTH: |
500mm |
| LOADING HEIGHT: |
910mm tandem or 1150mm single axle (ground to floor on standard wheels) |
| OIL REQUIREMENT: |
10 litres of oil to lift to 60° and terminating at ½’’ QRC |
| RAM CAPACITY: |
1st stage 16.1 tonnes 2nd stage 11.7tonnes 3rd stage 8.1 tonnes 4th stage 5.2 tonnes
|
| SINGLE AXLE: |
80mm/8 stud brakeless 9,000kgs@40km/hr |
| TANDEM OPTION: |
70mm/6 stud brakeless 12,000kgs@40km/hr |
| WHEELS ON SINGLE: |
385 / 65 x 22.5 - 28ply 9,600kgs@40km/hr |
| WHEELS ON TANDEM: |
11.5 / 80 x 15.3 - 12ply 10,300kgs@40km/hr |
| BRAKES: |
Optional |
| CHASSIS: |
200 x 100 x 6mm fully welded chassis |
| TOP CHASIS: |
125 x 75 RHS |
| SIDES: |
Detachable hinging sides that bolt in rigid, allowing easy access to side loading, RHS top shock rail to prevent damage. |
| HEADBOARD: |
Detachable with RHS top shock rail and extension rails with corner sockets in deck |
| TAILGATE: |
Detachable tailgate with RHS top shock rail, includes independent corner posts that allow rear door to be removed yet sides fixed. Door hinge is 100mm higher and 100mm forward of central balance point |
| TAILGATE LOCKING: |
Auto Open Door opening at 15° and fitted with spreading chains or bottom hinged, top locking via anti-loose latches as standard |
| ROPE RAILS: |
Optionally fitted with 1” bore pipe attached every third floor member (recommended) |
| FLOOR THICKNESS: |
3mm Corten non rust braced every 350mm (see options) |
| SIDE THICKNESS: |
Pressed 3mm with up right bracing |
| ROAD LIGHTS: |
Optional |
| DRAW BAR: |
Rigid drawbar |
| DRAW BAR SUPPORT: |
Fitted with 80mm jack support |
| TOWING EYE: |
Fixed 40mm eye |
| FINISH: |
Blasted, zinc base primer, 2 x gloss coats |
| COLOUR: |
Standard Yellow |