|
| BODY TYPE: |
Steel flat floor
Hinged removable sides and headboard |
| CAPACITY: |
4 tonnes by design |
| CAPACITIES: (Level Load) |
2.2m³ level loaded @ 2,000 kgs/m³ |
| BODY LENGTH: |
3,000mm |
| BODY WIDTH |
1,840mm |
| BODY DEPTH: |
425mm |
| LOADING HEIGHT: |
910mm single axle (Ground to Floor on standard wheels) |
| OIL REQUIREMENT: |
4 litres of oil to lift to 50° and terminating at ½’’ QRC |
| RAM CAPACITY: |
Single Stage 3½" bore |
| SINGLE AXLE: |
60mm / 6 stud brakeless 5,00kgs @ 40km/hr |
| WHEELS ON SINGLE: |
11.5 / 80 x 15.3 - 12ply 5,200 kgs @ 40km/hr |
| BRAKES: |
Optional |
| CHASSIS: |
125 x 75 x 6mm fully welded chassis |
| TOP CHASIS: |
125 x 75 RHS |
| SIDES: |
Detachable hinging sides that bolt in rigid, allowing easy access to side loading, RHS top shock rail to prevent damage. |
| HEADBOARD: |
Detachable with RHS top shock rail and extension rails with corner sockets in deck |
| TAILGATE: |
Detachable tailgate with RHS top shock rail, includes independent corner posts that allow rear door to be removed yet sides fixed. Door hinge is 100mm higher and 100mm forward of central balance point |
| TAILGATE LOCKING: |
Auto Open Door opening at 15° and fitted with spreading chains or bottom hinged, top locking via anti-loose latches as option |
| ROPE RAILS: |
Optionally fitted with 1” bore pipe attached every third floor member (recommended) |
| FLOOR THICKNESS: |
3mm braced every 450mm nominal |
| SIDE THICKNESS: |
Pressed 2.5mm with up right bracing |
| ROAD LIGHTS: |
Optional |
| DRAW BAR: |
Rigid drawbar |
| DRAW BAR SUPPORT: |
Fitted with 60mm jack support |
| TOWING EYE: |
Fixed 40mm eye |
| FINISH: |
Blasted, zinc base primer, 2 x gloss coats |
| COLOUR: |
Standard Yellow |
Download or Print LOADMASTER 1.04s Specifications - Loadmaster-104s.pdf (169KB)
|
