|
| BODY TYPE: |
Steel flat floor
Hinged removable sides and headboard |
| CAPACITY: |
12 tonnes by design |
| CAPACITIES: (Level Load) |
5.6m³ level loaded @ 2,000 kgs/m³ |
| BODY LENGTH: |
5,450mm |
| BODY WIDTH: |
2,440mm |
| BODY DEPTH: |
500mm |
| LOADING HEIGHT: |
1,190mm (ground to floor on standard wheels) |
| OIL REQUIREMENT: |
20 litres of oil to lift to 60° and terminating at ½’’ QRC |
| RAM TYPE: |
1st stage 29.7 tonnes
2nd stage 22.4 tonnes
3rd stage 116.1tonnes
4th stage 10.9tonnes
5th stage 6.5tonnes |
| TANDEM AXLE: |
90mm/8 stud brakeless
17,000kgs@40km/hr |
| WHEELS ON TANDEM: |
385 / 65 x 22.5 - 28ply 16,600kgs@40km/hr |
| BRAKES: |
Optional |
| CHASSIS: |
200 x 100 x 9mm fully welded |
| TOP CHASIS: |
152 x 76 RHS |
| SIDES: |
Detachable hinging sides that bolt in rigid, allowing easy access to side loading, RHS top shock rail to prevent damage. There are 2 removable panels with a center deck Staunchen each side. |
| HEADBOARD: |
Detachable with RHS top shock rail and extension rails with corner sockets in deck |
| TAILGATE: |
Detachable tailgate with RHS top shock rail, includes independent corner posts that allow rear door to be removed yet sides fixed. Door hinge is 100mm higher and 100mm forward of central balance point |
| TAILGATE LOCKING: |
Auto Open Door opening at 15° and fitted with spreading chains or bottom hinged, top locking via anti-loose latches as standard |
| ROPE RAILS: |
Fitted with 1” bore pipe attached every third floor member |
| FLOOR THICKNESS: |
3mm Corten non rust braced every 350mm (see options) |
| SIDE THICKNESS: |
Pressed 3mm with up right bracing |
| ROAD LIGHTS: |
Optional |
| DRAW BAR: |
200 x 100 x 9mm single beam drawbar |
| DRAW BAR SUPPORT: |
Fitted with 80mm jack support |
| TOWING EYE: |
Fixed 50mm eye |
| FINISH: |
Blasted, zinc base primer, 2 x gloss coats |
| COLOUR: |
Standard Yellow |
Download or Print LOADMASTER 1.12T Specifications - Loadmaster-112T.pdf (301KB)
|
