|

| FEED OUT TYPE |
Teasing elevator with Hydraulic sensing to offside with optional tease rota shredder to near side. Retarder bar fitted to elevator for square bales |
| BALE TYPES |
All Rounds - Squares - Pit Silage |
| CROP TYPES |
Silage / Hay / Straw bales |
| HYDRAULIC CONTROL: |
2 Double acting |
| CAPACITIES IN KGs |
3,600kgs |
| 4’ ROUND BALES: |
2 |
| BODY LENGTH: |
1,465mm is our standard body size for 4' bales with all components jig built around this - we do offer optional 5' for bigger bales |
| OVERAL LENGTH: |
4,030mm without loading tines |
| OVERAL WIDTH: |
2,300mm |
| TARE WEIGHT: |
1,630kgs |
| AXLE SINGLE: |
60 / 6 Stud brakeless Rigid Axle |
| WHEELS SINGLE: |
11.5 / 80 x 15.3 (see options) |
| CHASSIS: |
All chassis' are made of 152mm x 76mm - 400 grade RHS - fully welded to 4711 standard |
| DRAW BAR LENGTH |
1450mm with 70mm jack support |
| FLOOR THICKNESS |
2mm Full steel floor |
| TOW EYE |
All drawbars are fitted with a European 40mm diameter forged eye - options on swivel eye or variable height eyes are available |
| HEADBOARD |
Mesh with RHS rails |
| OIL REQUIREMENT |
Minimum of 55 litres / minute |
| RAM |
All feeder use a locally made 4" diameter hydraulic cylinder - double acting - it has a lift capacity of 1,850kgs with only 1,500PSI - ensuring all bales can be loaded |
| LOADING |
All Agmech feeders have a unique off ground loading system that has 2 x Swedish tines that pierce the bale 150mm from ground level thus eliminating tine damage but simplifying plastic and wrap removal - 2nd bale carried on tines awaiting feed-out |
| FINISHING |
Blasted or solvent washed - heavy zinc based primer then 2 x gloss coats |
| COLOUR |
Agmech Yellow on body with Charcoal parts, wheels white |
| OPTIONS |
Common options are 400 wheels - twine box - we will gladly consider any other requirements that you have |
Specifications download - 2-Bale-Multi-Feeder.pdf (345KB)
|